LewanSoul LD-3015MG 標準フルメタルギアデジタルサーボ with 17kg高トルクfor RCカーロボット(270度制御角)
価格： ￥1,790
カテゴリ： おもちゃ＆ホビー
ブランド： LewanSoul
17kgの大きなトルク。 15kg・cm6.6V; 17kg・cm7.4V
フルメタルギア。 それは正確さのために良い、サービス寿命が大幅に増加している
270度の回転。 0度から270度までの制御可能な角度範囲、優れた直線性、精密制御。 電源オフ時に360度以内で回転できます
高精度ポテンショメータを新しいデザインで使用する。 精度と直線性が大幅に向上しました！ 正確な動きは、ロボットを作る必要性を満たすことができる
寸法：40 * 20 * 40.5mm
Specifications:
Weight: 60g(60ml)
Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)
Speed: 0.16sec/60C(7.4V)
Accuracy:
Torque:15 kg.cm (6150ml.in) 6.6V;17 kg.cm (6980ml.in) 7.4V
Working Voltage: 6-7.4V
Min Working Current: 1A
No-Load Current: 100mA
# Spline: 25T(6mm diameter)
The servo wire: 30cm(11.8inch) in length
Package Contents:
1 x Digital servo
1 x 30cm servo wire
1 x Servo horn kit(as shown in the figure)
If you have any questions, please feel free to contact us at support@lewansoul.com
Note:
Note: Please be sure to avoid locked-rotor when using servo, locked-rotor means that artificially or machine obstructs the servo to rotate normally, the locked-rotor will lead to internal current increased to more than 7 times and the temperature increases, servo will burn out.
Direction for use:
PWM adjust the angle, the cycle is 20ms, Pulse width level with duty ratio 0.5ms~2.5ms is consistent with the angle range(0 degree~270 degree) of servo, which is in linear relationship.Generally speaking, our servo controller using the range of 500~2500 is consistent with the duty ratio 0.5ms~2.5ms of the output angle controlled by servo.In this way, the control precision of ours servos can reach 3us, the control precision can reach degree among the range of 2000 Pulse-Width.
Weight: 60g(60ml)
Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)
Speed: 0.16sec/60C(7.4V)
Accuracy:
Torque:15 kg.cm (6150ml.in) 6.6V;17 kg.cm (6980ml.in) 7.4V
Working Voltage: 6-7.4V
Min Working Current: 1A
No-Load Current: 100mA
# Spline: 25T(6mm diameter)
The servo wire: 30cm(11.8inch) in length
Package Contents:
1 x Digital servo
1 x 30cm servo wire
1 x Servo horn kit(as shown in the figure)
If you have any questions, please feel free to contact us at support@lewansoul.com
Note:
Note: Please be sure to avoid locked-rotor when using servo, locked-rotor means that artificially or machine obstructs the servo to rotate normally, the locked-rotor will lead to internal current increased to more than 7 times and the temperature increases, servo will burn out.
Direction for use:
PWM adjust the angle, the cycle is 20ms, Pulse width level with duty ratio 0.5ms~2.5ms is consistent with the angle range(0 degree~270 degree) of servo, which is in linear relationship.Generally speaking, our servo controller using the range of 500~2500 is consistent with the duty ratio 0.5ms~2.5ms of the output angle controlled by servo.In this way, the control precision of ours servos can reach 3us, the control precision can reach degree among the range of 2000 Pulse-Width.