Aquatec Erp-1000 Permeate Pump by Aqua Tec
価格: ¥7,150
Aquatec Erp-1000 Permeate Pump
No electricity required, powered only by hydraulic energy normally lost to drain.
Improves water quality by insuring membrane efficiency.
Improves membrane life, prevents "TDS creep".
Increases product tank pressure (up to 95% of feed pressure).
For all membranes rated 10 - 120 GPD.
Effective for inlet water pressures as low as 30 PSI.
Compact size for easy installation.
Powered by hydraulic energy from brine water usually lost to the drain (i.e. no electricity required), the Permeate Pump pushes more purified water into the storage tank, reducing membrane back pressure, therefore maximizing available feed pressure. This pump dramatically improves the membranes production, reducing waste-water by 80% or more. Basically, if an R.O. system requires 10 Gallons of tap water to produce 1 Gallon of pure water (10: 1), the Permeate Pump should reduce this ratio below 3: 1.
Permeate Pumps can also bring storage tanks up to line pressure, then shut the system down when the tank reaches capacity, removing the need for a hydraulic shut-off valve. Permeate pumps also deliver faster R.O. water production, higher delivery pressures, superior water quality, and extended filter/membrane capacity.